|
 |
 |
| Complete
Digital Wireless Camera System for broadcasting
use |
|
 |
| COFDM
RF modulation adds to the digital quality
an absolute ruggedness of transmission |
|
|
| Ready
to use: just plug your Video and Audio (analog
or digital) in the transmitter and you will
get back at the receiver Video and Audio (analog
and digital) |
|
|
| Full
broadcast quality is guaranteed by both high
quality MPEG-2 video encoding and high technology
COFDM and RF design |
|
|
| Ultra
small size and very low power consumption
make it the base for your mobile applications
of COFDM Wireless Camera Links |
|
|
 |
|
APPLICATIONS
Transmission
of video and audio with COFDM modulation
TECHNICAL
SPECIFICATIONS
|
DWCL-012
- CHALLENGER
|
| INPUTS |
Analog Audio (L+R)
Digital Audio (SPDIF)
Analog Video
Digital Video (SDI) |
| OUTPUTS |
2K COFDM
2.4 – 2.5 GHz
8 MHz Channel bandwidth |
| Interface |
Nr.
1 serial RS 232 |
| MPEG
2 modes |
Standard
and Low Delay mode |
| Power
supply |
15V |
|
Total power consumption |
less than 15 W |
|
Up
Converter
|
| IF
In |
36 MHz |
| RF
Out |
2400–2600 MHz / 2600–2800
MHz |
| Gain |
40
dB |
| L.O.
Phase Noise |
-85
dBc/Hz @ 100 Hz |
| MER |
27.5
dB |
|
Power output at 1 dB compression point |
+30 dBm (1W) |
| Output
IP3 |
+43dBm |
| Frequency
setting with binary parallel mode or BCD switch
(full band) |
|
Down
converter
|
| RF
In |
2400–2600 MHz / 2600–2800
MHz |
| 1st
IF |
600 MHz / 950 MHz |
| Gain |
24.5
dB |
| L.O. Phase
Noise |
-85
dBc/Hz @ 100 Hz |
| MER |
27.5
dB |
|
Noise figure |
1.5 dB |
| Output
IP3 |
+11
dBm |
| Output
power at 1 dB compression point |
0
dBm |
| Frequency
setting with binary parallel mode or BCD switch
(full band) |
For further information and block diagram about
Challenger, click here.
You need a
.doc reader, like Word, or OpenOffice
(that's free to download).
The Challenger has been used in the last America's
Cup edition. To know information about it, click
here.
|
|
